DIY Rolling Interior Barn Doors
Interior barn doors – Rolling barn doors are both functional and attractive. If weighted properly, they are easier to maneuver and are most helpful in windy conditions because you will not have to struggle to open and close the door. When snow otherwise blocks the movement of an ordinary door, rolling barn doors allow an easier entrance and exit. In addition, they allow more space in your shed, because it requires less space to operate.
You can add finished color white interior barn doors but first, you need to measure the width and the height of the door space with a tape measure to determine the amount of the frame. Mark the height and width of the door frame to the 2-by-4 plates. Glow 2-by-4 boards in accordance with the measurements you are marked with an all. Ice you need a heavier frame, cut two matching pieces for each side of the door frame and stack and nail them together. Alternatively, you can also use 4-by-4-inch lumber. The lay out the frame on a flat, solid surface. Nail or screw metal braces across the corners of the frame. This will strengthen the framework and make it more robust.
14 Photos Gallery of: DIY Rolling Interior Barn Doors
Measure the width and height of your new frame to determine the length and number of planks, you want to use for the rustic interior barn doors. Mark measurements on the 4-by-1 boards and then cut the boards accordingly. Lay cut 4-by-1 boards on the frame. See if they just use it. You are sure of the location, use wood glue on the inside of the door frame where the 4-by-1 door boards will be attached. Then place the door boards and nail them in the frame. Put sliding track top door frame. The track is placed on the back of the child siren. Mark where the tracks will be linked. Use a spirit level at ensures the mark is right. Screw the metal tracks on the frame.
Arrange track wheels on the bottom of the frame and mark their location. Screw track wheels to the bottom of the frame. Attach the other sliding door track to the barn wall. Location of the track must match the track on the door. Use a level at ensures the tracks are yet. Before mounting the track on the wall, check the location with a spirit level. When you are sour on, nail or screw the tracks to the barn walls.